3-roll-bending machines
The machine was specially desinged for motorical rounding of sheets and is available in different widths and material thicknesses.
Technical data
| Model | RME 20 | RME 30 | RME 42 | RME 52 | RME 60 |
| Work Area [mm] | 430 | 530 | 1030 | 1280 | 1530 |
| Sheet thickness * [mm] | 0,4 | 0,6 | 0,6 | 0,9 | 0,8 |
| Ø Rolls [mm] | 20 | 30 | 42 | 52 | 60 |
| Model | RME 70 | RME 85 | RME 100 | RME 120 | |
| Work Area [mm] | 2030 | 2030 | 2030 | 2530 | |
| Sheet thickness * [mm] | 0,8 | 1,2 | 1,8 | 1,5 | |
| Ø Rolls [mm] | 70 | 85 | 100 | 120 |
* The sheet thickness is based on material with a tensile of 400 N/mm² and a yield point of 250N/mm².
Standard features:
- Upper roll can be swivelled out forwards by quick release
- Rapid setting of the lower roll
- Worm gear adjustment of the rear roll with mech. digital gauge
Sonderzubehöhr:
- Infinitely adjustable main drive
- Three roll drive
- Folding groove in top roll
- Wiring channels in bottom and bacck roll
- Surface hardened rolls
- Side stop for conical rounding
- Table with side stop
- 4th Roll as bending roll with PLC and automatic mode
- Motorized infeed of the back roll